Cleaning, Storage And Ordering Of Spare Parts; Ordering Replacement Parts; Disposal And Recycling - EINHELL GC-EC 750 T Originalbetriebsanleitung

10. Cleaning, storage and ordering
of spare parts
Carry out the cleaning and maintenance work be-
fore putting into storage.
10.1 Cleaning
•
Regularly clean the clamping mechanism by
blowing it out with compressed air or cleaning
it with a brush. Do not use tools for cleaning.
•
Keep the handles free of grease so that you
can maintain a firm grip.
•
Clean the equipment as required with a damp
cloth and, if necessary, mild washing up li-
quid.
Danger!
•
Always disconnect the mains plug before
cleaning the chainsaw.
•
Never immerse the unit in water or other li-
quids in order to clean it.
10.2 Storage
•
If you are not going to use the chainsaw for an
extended period of time, remove the chain oil
from the tank. Briefly immerse the saw chain
and the cutter bar into an oil bath and then
wrap them in oil paper.
•
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal sto-
rage temperature is between 5 und 30 °C.

10.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Anl_GC_EC_750_T_SPK7.indb 26 Anl_GC_EC_750_T_SPK7.indb 26
GB

11. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
- 26 -
18.09.14 15:34 18.09.14 15:34