Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.4 Electrical Connections
Verify the efficiency of the grounding system in the building. Make sure that line voltage (V) and frequency (Hz)
correspond to those of the machine (See the identification plate and wiring diagram). The machine is equipped
with an electrical cord that connects to a multipolar plug. The plug is to be connected to a wall switch equipped
with a circuit breaker.
3. Use and Cleaning Information
3.1 Control Descriptions
1) On-Off Button: Press the button to start the machine. Release to stop the machine.
2) Speed adjustment knob (HM-65 model only): The speed adjustment knob both
adjusts utensil speed and directly by-passes to maximum machine speed. To switch
from one condition to another, rotate the knob one notch.
a) Adjustable speed (only use with the whip utensil):
- on HM-65, it is marked:
b) Maximum speed (only use with the mixer utensil):
- on both HM-65 models, it is marked:
3.2 Mixer Use
•
Insert the mixer utensil in the motor unit and tighten the utensil lock nut.
•
Connect the motor unit to the power plug.
•
For HM-65 models, turn the speed adjustment knob.
•
Firmly hold the mixer lock nut with one hand and the motor unit handle with
the other.
•
Insert the mixer in the container with the product to be processed.
•
Press the on button being careful not to near hands or any other part of the
body to the area where the mixer blades are located.
•
When finished, release the on button to stop the utensil and remove the
utensil from the container.
www.combisteel.com
HM-35
HM-65
HM-65
9
Werbung
