Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3 Whip Use
•
Insert the whip utensil in the motor unit and tighten the utensil lock nut.
•
Connect the motor unit to the power plug.
•
For model HM-65, turn the speed adjustment knob to a number between 1 and 10.
•
Firmly hold the mixer lock nut with one hand and the motor unit handle with the other.
•
Insert the whip in the container with the product to be processed.
•
Press the on button being careful not to near hands or any other part of the body to the
area where the whips are located.
•
Rotate the speed adjustment knob to select the best rotation speed for the process.
•
When finished, release the on button to stop the utensil and remove the whip utensil from
the container.
3.4 Recommendations for Use
•
Use the mixer utensil in containers, making sure to rest
the protective blade hood on the bottom so that
processing product never exceeds the maximum level
notch on the utensil (2/3 of the accessory).
•
Use the whip tool in containers, making sure never to rest
the two whips on the bottom and so that the gear box is
always out of the processing product.
www.combisteel.com
HM-65
WITH WHISK
10
Werbung
