1.6 Safety Devices
1.7 Safety Information
Careful consultation of this manual before installation and use is essential. Continual observance of the
•
indications found in the manual guarantee personal and machine safety.
•
Never tamper with safety devices for any reason.
Strict observance of the work safety regulations issued by the responsible organisations in each country is
•
strongly recommended.
The manufacturer is not liable for damages to persons or things due to the neglect of safety regulations.
•
•
Correct machine placement, illumination and cleanliness are important conditions for personal safety.
•
Do not expose the machine to the elements.
•
Machine connections and start-up must only be performed by specialised technicians.
Make sure that the system specifications of the room where the machine is installed correspond to the
•
information printed on the plate.
•
Make sure the machine is connected to a grounding system.
The work area around the machine must always be kept clean and dry.
•
•
Use the garments foreseen by work safety regulations.
This utensil must only be used for its specific purpose; any other use is considered improper and therefore
•
hazardous.
•
Check the suitability and weight of products to be processed; do not overload the machine.
Introducing objects, tools, hands or other things within hazardous parts is forbidden.
•
•
Keep the machine away from children.
Disconnect the power cord from the electrical socket when the machine is not in use.
•
In the event of malfunctions and/or problems, do not attempt to repair the machine. Contact the authorised
•
dealer.
Use original spare parts.
•
Before cleaning the machine, disconnect the power supply by unplugging the machine.
•
•
Do not clean with high-pressure jets of water.
www.combisteel.com
7