Herunterladen Diese Seite drucken

CombiSteel 7067-Serie Gebrauchsanweisung Seite 4

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. General Information
1.1 Purpose of the Manual
This manual was written by the Manufacturer and is an integral part of machine equipment. During design and
construction the Manufacturer has carefully considered possible hazards and personal risks that may result from
interaction with the machine. In addition to observing the specific laws in force, the manufacturer has adopted
all "exemplary construction technique principles". The purpose of this information is to advise the users to adopt
extreme caution to avoid risks. However, discretion is invaluable. Safety is also in the hands of all the operators
who interact with the machine. Keep this manual in a suitable place, always within reach for consultation. The
following symbols are included to better stress some passages:
The following is enclosed with this manual:
Warranty certificate describing the Manufacturer's warranty conditions.
Documents that prove conformity with effective health and safety laws.
Contact the Authorised dealer for any service request, information or spare parts order.
1.2 Manufacturer and Machine Identification
1.3 Machine Descriptions
The mixer range is made up of the following models:
Model HM-35 was designed for small processing needs. The utensil has a classic vertical hold shape. The motor
unit is constructed with a plastic structure while the mixing utensil is made up of stainless steel, aluminium alloy
and plastic elements. The machine has only one speed.
Model HM-65 was designed for small-medium work needs. The utensil has a classic vertical hold shape. The
motor unit is constructed with a plastic structure while the mixing and whip utensils are made up of stainless
steel, aluminium alloy and plastic elements. The machine has one mixer speed and adjustable whip speed.
General Information
Noise Level
Installation
Protection Level
Electrical Shock Protection
Directive Compliance
Less than 70 dB(A)
Hand-held utensil
IPX3
Class II
93/68/EC - 98/37/EC - 2003/108/EC - 2002/72/EC - Regulation (EC) nO
1935/2004 - 2004/108/EC - 2006/95/EC
www.combisteel.com
4

Werbung

loading