Philips Satinelle ICE HP6481 Bedienungsanleitung Seite 13

Problem
The appliance
does not
work.
Skin irritation
occurs.
The cooling
glove is not
cold enough.
Cause
The socket to
which the
appliance is
connected is not
live.
The appliance is
not switched on.
You did not
attach the
epilating head
correctly.
You used the
epilator for the
first time or after
a long period of
disuse.
You did not put
the ice gel pad in
the freezer or
freezing
compartment.
You did not
freeze the ice gel
pad long enough.
Solution
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may need
to switch on the light to activate
the socket.
Make sure that the appliance is
plugged in and switched on.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter 'Using
the appliance'. Also make sure you
keep the epilating head clean.
Put the ice gel pad in the freezer
or freezing compartment (***) for
at least 2 hours. Do not store
the ice gel pad in the refrigerator.
Put the ice gel pad without the
cooling glove in the freezer or
freezing compartment (***) for at
least 2 hours.
EnglisH
1