Philips Satinelle ICE HP6481 Bedienungsanleitung Seite 11

 Remove the ice gel pad from the cooling glove.
 Clean the cooling glove with a moist cloth after each use.
Make sure the outside of the ice gel pad is completely dry before
you freeze it again.
cleaning the epilating head
1 Make sure the appliance is switched off and unplugged.
 Remove the epilating head (Fig. 10).
Press the release button (1) and pull the epilating head off the appliance
(2).
 Clean the epilating head, including the epilating discs and the plastic
housing, with the cleaning brush (Fig. 11).
 For thorough cleaning, you can remove the massaging
element (Fig. 1).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 1).
Never try to detach the epilating discs from the epilating head.
6 Place the epilating head on the appliance and press it onto the
appliance until it snaps home ('click') (Fig. 1).
The epilating head only fits onto the appliance in one way.
storage
1 Store the appliance and the accessories in the pouch.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 15).
- If the ice gel pad is damaged, you can throw it away with the normal
household waste.
EnglisH
11