TEUFELBERGER CECLIMB Bedienungsanleitung Seite 4

GENEriC WOrk POsiTiONiNG CauTiONs
GENEriC WOrk POsiTiONiNG CauTiONs
This equipment is designed for use as part of a Work Positioning system;

Work Positioning may only be adopted when a thorough Risk Assessment has demons-

trated that the work can be performed safely and the use of other, potentially safer work
equipment is not reasonably practicable;
The user must be securely attached to at least one anchor point at all times;

Each anchor point, and the means of attachment to it, shall be of suitable and sufficient

strength and stability for the purposes of supporting any foreseeable loading including tho-
se in an emergency contingency;
The system must be installed and used in such a way as to prevent unplanned or uncon-

trolled movement of the user;
The potential for a fall shall be minimised at all times;

Where potential for a fall is anticipated, Fall Arrest systems shall be adopted;

Work Positioning systems normally attach to the Ventral point on a Sit Harness. On some

Work Positioning harnesses, the ventral point is considered to be rolling/sliding hardware
on a textile 'bridge'. Consult the user instructions of the sit harness in question for details.
A Work Positioning system shall only be used if:

a. The system includes a suitable backup system for preventing or arresting a fall (and
the user is connected to it). A second structural anchor point is required especially
during cutting operations; or
b. Where it is not reasonably practicable to comply with a), all practicable measures are
taken to ensure that the work positioning system does not fail.

All manuals and user guides at all-guides.com