Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
1 Shaft lock
2 Switch lever
3 Wheel guard
4 Screw
5 Bearing box
Depressed center wheel diamiter .................................. 125 mm
Spindle thread ........................................................................ M14
No load speed (min
) .......................................................... 4100-11000
-1
Power......................................................................................... 1000 W
Net weight ............................................................................... 2.2 kg
Safety class ............................................................................ II
• Due to our continuing program of research and
devel opment, the specifications herein are
subject to change without notice.
• Specifications may differ from country to
country.
• Weight according to EPTAProcedure 01/2003
Intended use
The tool is intended for cutting, grinding and sand-
ing of metal and stone materials without the use of
water.
Power supply
The tool should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single-
phase AC supply. They are doubleinsulated in ac-
cordance with European Standard and can, there-
fore, also be used from sockets without earth
wire.
Safety hints
For your own safety, please refer to the enclosed
safety instructions.
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
Explanation of general view
6 Lock nut
7 Depressed center grinding
wheel/ Multidisc
8 Inner flange
9 Lock nut wrench
Specification
ence to grinder safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
ing, Wire Brushing, or Abrasive Cutting-off Op-
erations:
1. This power tool is intended to function as
2. Operations such as polishing are not recom
3. Do not use accessories which are not
GEB0332
4. The rated speed of the accessory must be at
5. The outside diameter and the thickness of
10 Shaft lock
11 Exhaust vent
12 Inhalation vent
Safety Warnings Common for Grinding, Sand-
a grinder, sander, wire brush or cut-off tool.
Read all safety warnings, instructions, il-
lustrations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
mended to be performed with this power
tool. Operations for which the power tool was
not designed may create a hazard and cause
personal injury.
specifi cally designed and recommended
by the tool manufacturer. Just because the
accessory can be attached to your power tool, it
does not assure safe operation.
least equal to the maximum speed marked
on the power tool. Accessories running faster
than their rated speed can break and fly apart.
9
Werbung
