Werbung
Verfügbare Sprachen
Verfügbare Sprachen
cially when working corners, sharp edges etc.
This can cause loss of control and kickback.
• NEVER use tool with wood cutting blades and
other
• sawblades. Such blades when used on a grinder
fre quently kick and cause loss of control leading
to per sonal injury.
CAUTION:
• After operation, always switch off the tool and
wait until the wheel has come to a complete
stop before putting the tool down.
Grinding and sanding operation (Fig. 8)
ALWAYS hold the tool firmly with one hand on
housing and the other on the side handle. Turn the
tool on and then apply the wheel or disc to the
workpiece.
In general, keep the edge of the wheel or disc
at an angle of about 15 degrees to the workpiece
surface.
During the breakin period with a new wheel, do
not work the grinder in the B direction or it will cut
into the work piece. Once the edge of the wheel
has been rounded off by use, the wheel may be
worked in both A and B direction.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed. (Fig. 9)
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment
should be per formed by Kraissmann Authorized
or Factory Service Centers, always using Kraiss-
mann replacement parts.
14
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Kraissmann tool spec-
ified in this manual. The use of any other acces-
sories or attachments might present a risk of
injury to persons. Only use accessory or attach-
ment for its stated purpose.
If you need any assistance for more details re-
garding these accessories, ask your local Kraiss-
mann service center.
• Wheel guard (Wheel cover)
• Inner flange
• Depressed center wheels
• Lock nut (For depressed center wheel)
• Rubber pad
• Abrasive discs
• Lock nut (For abrasive disc)
• Lock nut wrench
• Wire cup brush
• Wire bevel brush 85
• Side grip
• Dust collecting wheel guard
• Diamond wheel
KRAISSMANN Power Tools, Ltd
North Rhine-Westphalia, Dusseldorf
Made in Germany
Werbung
