HEYLO PV 6000 Betriebsanleitung Seite 32

Fan PV 6000
DANTHERM assumes no warranty for any damage
caused by the use of spare parts from other manu-
facturers.
Enquiries and orders For wear and spare parts,
please contact your dealer or DANTHERM directly,
providing the following information:
– Device type,
– Serial number,
– Year of construction,
– Designation of the component,
– Quantity,
– Form of shipping.
See also
 Contact to DANTHERM GmbH
19 Repairs
The following section describes who may repair the
device and how it can be repaired.
NOTICE
Repairs may only be carried out by staff authorized
by the manufacturer during the warranty period of
the device.
Repairs perfomed by the company
operating the device
After the statutory warranty has expired, repairs may
be carried out by the company operating the device,
provided appropriate expertise is shown. DAN-
THERM will not assume any liability for these re-
pairs.
Contact the DANTHERM service department or your
dealer if you have any questions about repairs.
See also
 Contact to DANTHERM GmbH
20 Decommissioning,
storage and disposal
The following principles apply for the decommission-
ing, storage and disposal of the device:
These tasks may only be carried out by trained and
authorised specialists.
30 / 36
Danger to life due to electric shock
Touching electrically live parts can be fatal.
a) Switch off the device and pull out the mains
20.1
a) Switch off the device at the device switch and
b) Clean the device (see Servicing, inspecting and
c) Store the device in a frost-free and dry environ-
[ 21]
 The device is now temporarily decommissioned.
See also
 Contact to DANTHERM GmbH
 Cleaning and maintaining the device
20.2
Storage information can be found in Technical de-
tails.
20.3
The device is primarily made of recyclable materials.
It does not represent any danger to the operator and
the environment when handled properly. However,
operation of the device may lead to the generation of
waste containing substances that are environmental-
ly hazardous or harmful to health. These materials
must be disposed of properly in accordance with the
regulations.
The individual components of the device (e.g. metal
components, etc.) must be taken to a qualified dis-
posal and recycling company. Commission a quali-
fied, specialist company to dispose of and recycle
[ 21]
the device.
See also
 Contact to DANTHERM GmbH
DANGER
plug.
Decommissioning
disconnect the mains plug.
cleaning the device [ 28]).
ment.
Storing the device
Disposal
[ 21]
[ 28]
[ 21]
EN