Installation
8.2.2
Product identification
Product page
www.endress.com/cpa640
Interpreting the order code
The order code and serial number of your device can be found in the following locations:
• on the nameplate
• in the delivery papers
Obtaining information on the device
1.
Go to the product page for your device on the internet.
2.
In the navigation area on the right-hand side, select "Check your device features" under
"Device support".
An additional window opens.
3.
Enter the order code from the nameplate into the search field.
You will receive information on each feature (selected option) of the order code.
8.3
Scope of delivery
The scope of delivery comprises:
• Assembly in the version ordered
• Operating Instructions
9
Installation
9.1
Installation conditions
• The assembly can only be installed if the process is unpressurized and the container is
empty.
• The assembly is designed for installation on containers, pipes or in flow assemblies.
• Appropriate process connections must be provided for the installation.
• Make sure the orientation is correct. Information can be found in the manual of the sensor
used.
Process connections depend on the assembly version:
Assembly version
CPA640-A/B***
CPA640-C/D***
CPA640-E***
CPA640-G/I***
12
Process connection
NPT ½"
NPT ¾"
NPT 1"
M25x1.5
Ecofit CPA640