Bosch 6 Serie Gebrauchsanleitung Seite 41

Tip: Instantaneous switching is espe-
cially suitable when using the glass
blender attachment.
7.4 Finishing processing
Unplug the mains plug.
1.
→ Fig. 19
Press the release button and raise
2.
the swivel arm until it engages.
20
→ Fig.
If the swivel arm does not open
3.
easily or there is a lot of dough on
the tool, proceed as follows:
Open up the swivel arm a bit
‒
and use a spatula or wooden
spoon to push the dough off the
tool.
Open the swivel arm right up, re-
‒
move the dough still remaining
on the tool and only then take
the tool off.
Press the ejector button to release
4.
the tool and remove.
→ Fig. 21
Only ever press the ejector button
with the swivel arm open or the
tool may get jammed in the bowl.
Take the cover off the main drive.
5.
→ Fig. 22
Turn the bowl clockwise and re-
6.
move.
23
→ Fig.
7.5 Using accessory drives
Notes
¡ Remove the cover to use ac-
cessories on drive 2 or 3.
¡ Always close unused drives with
the covers.
¡ Please follow the instructions for
the accessory.
Lift the cover of drive 2 by the side
1.
opening and remove.
24
→ Fig.
Fit the cover of drive 2 and press
2.
down firmly.
→ Fig. 25
Turn the cover of drive 3 anticlock-
3.
wise and remove.
→ Fig. 26
Fit the cover of drive 3 and secure
4.
by turning clockwise.
27
→ Fig.
8 Basic settings
Ba s i c s e t t i n gs
You can configure the basic settings
Ba s i c s e t t i n gs
for your appliance to meet your
needs.
8.1 Changing the basic set-
tings
In the main menu use
1.
select "Setting" and confirm with
⁠ .
Use or to select the required
2.
setting and confirm with
Use or to select further op-
3.
tions or change settings and con-
firm with ⁠ .
To leave an option or setting and
4.
go back a level, press
8.2 Overview of basic set-
tings
You can find an overview of the basic
settings here.
Setting
Language
Basic settings en
or
⁠ .
⁠ .
Description
Select the display
language.
to
41