Atag Zone Manage Installationsanleitung Seite 15

GB
thermoregulation
Temperature control
Scenario no. 1: the boiler is equipped with an
ATAG zone connection
The boiler and the control unit communicate for
optimised operation. In this scenario, several types
of temperature control are possible depending on
the configuration and the installation's parameter
settings. Please refer to the boiler instructions.
Scenario no. 2: the boiler does not have an ATAG
zone connection
In this scenario, the control unit cannot perform
temperature control. The water flow temperature for
Zone 1 is defined by the boiler setting. For Zone 2, the
module then controls the motorised mixing valve in
order to maintain a fixed water flow temperature, as
defined by parameter 502.
For Zone 3, the module then controls the motorised
mixing valve in order to maintain a fixed water flow
temperature, as defined by parameter 602.
15