NEFF B1DCA0A 0 Serie Gebrauchs- Und Montageanleitung Seite 57

9 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
9.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis- Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
Automatic timer
- Switched off.
⁠ - - Cooking time after which the hotplates
switch off.
Duration of the timer end signal
– 10 seconds.
– 30 seconds.
– 1 minute.
⁠ ⁠ Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
1
hotplate.
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
1
again.
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
Resetting to the factory settings
– Switched off.
– Switched on.
Factory setting
1
1
1
1
1
1
9.2 Changing basic settings
Requirement: The hob is switched off.
1. Switch on the hob.
2. Within the next 10 seconds press and hold
approx. 4 seconds.
and flash alternately on the left-hand display.
a
lights up on the right-hand display.
a
3. Repeatedly touch
pears on the left-hand display.
4. Use or to set the required value.
5. Press and hold
a The setting is activated.
Tip: To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.
Basic settings en
until the required indicator ap-
for 4 seconds.
for
33