NEFF B1DCA0A 0 Serie Gebrauchs- Und Montageanleitung Seite 54

en Basic operation
4.5 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.
5 Basic operation
5.1 Switching the hob on or off
The main switch is used to switch the hob on and off.
If you switch the appliance back on again within
4 seconds after switching off, the hob will start up with
the previously stored settings.
5.2 Switching on the hob
▶
Touch .
a The indicator lamp above
a The displays light up.
a The hob is ready for use.
5.3 Switching off the hob
The hob will switch off automatically when all hotplates
have been switched off for a while (10-60 seconds).
▶
Touch .
a The indicator lamp above
a The displays go out.
a All hotplates are switched off.
a The residual heat indicator remains on until the hot-
plates have cooled down sufficiently.
5.4 Setting the hotplates
To set a hotplate, it has to be selected.
Select the required heat setting on the control panel.
Heat setting
1 Lowest setting
9 Highest setting
. Every heat setting has an intermediate
setting, e.g. 4. .
5.5 Selecting heat settings
Requirement: The hob is switched on.
1. Select the hotplate with
lights up on the power level display.
a
30
lights up.
goes out.
.
Display Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
The hotplate is hot.
2. Within the next 10 seconds, touch
The basic setting appears.
– Power level 9
– Power level 4
5.6 Changing heat settings
1. Select the hotplate with
2. Touch or until the required heat setting ap-
pears.
5.7 Switching off the hotplate
There are 2 ways to switch off the hotplate
1.
Touch twice.
appears on the heat setting display.
a
a After approx. 10 seconds the residual heat indicator
appears.
2. Select the hotplate and touch
pears on the heat setting display.
a After approx. 10 seconds the residual heat indicator
appears.
Note: The hotplate last selected remains activated. You
can adjust the hotplate without selecting it again.
5.8 Recommended cooking settings
You can find an overview of different foods with appro-
priate power levels here.
The cooking time varies depending on the type, weight,
thickness and quality of the food. The ongoing power
level depends on the cookware used.
Cooking tips
¡ To bring food to the boil, use heat setting 9.
¡ Stir thick liquids occasionally.
¡ Food that needs to be seared quickly or that initially
loses a lot of liquid during frying should be fried in
small portions.
¡ Tips for saving energy when cooking. → Page 28
or ⁠ .
.
or until ap-