Siemens SIMATIC HMI Smart 700 IE V4 Originalbetriebsanleitung Seite 9

Note
The connection of the power supply must be carried out by the operator/user in accordance with the national installation
regulations.
WARNING
Danger due to voltage/current
Only carry out assembly and disassembly work when the device is disconnected from power supply.
The devices with IP20 degree of protection on the rear must be integrated into an enclosure or cabinet that has a degree of
protection sufficient for the hazards at the place of use.
WARNING
Safe functional extra-low voltage
The product must be operated with safe functional extra-low voltage (SELV, PELV). For more information on safe functional
extra-low voltage, refer to the operating instructions.
Comply with the notes and warnings in the operating instructions.
WARNING
Mechanical danger
Secure the HMI device adequately against falling during assembly or disassembly.
The enclosure or cabinet in which the device is integrated must provide protection against electric shock and against the
spread of fire. The enclosure or the cabinet must meet the requirements for mechanical strength and the degree of
protection for the relevant application.
Observe the notes in the associated operating instructions and the documentation of the control cabinet.
Electromagnetic compatibility
The HMI device is intended for operation in the EMC environment class Industry.
Ensure an EMC-compliant installation as described in the operating instructions.
8
SMART 700 IE V4 and 1000 IE V4
A5E53488386-AA, 01/2024