Siemens SIMATIC HMI Smart 700 IE V4 Originalbetriebsanleitung Seite 8

SIMATIC HMI
HMI devices
SMART 700 IE V4 and 1000 IE V4
Compact Operating Instructions
Original instructions
1 Notes on safety and product conformity
Function
SIMATIC products control, regulate and monitor applications in automation systems, for example, in the field of industrial
automation technology and process engineering.
EU and UK Declaration of Conformity
You can find the EU Declaration of Conformity here on the Internet
(https://support.industry.siemens.com/cs/cn/en/view/109814026).
Documentation
The operating instructions for the SIMATIC HMI SMARTLINE devices described in this document can be found on the Internet
at the following address:
• HMI SMARTLINE Panel (https://support.industry.siemens.com/cs/cn/en/view/109824468)
Software download
You can find the WinCC flexbile SMART download package here on the Internet (www.siemens.com.cn/smartline).
Intended use
The device is designed for use in industrial environments for operating and monitoring plant processes.
The product may only be handled by personnel qualified for the respective task and in compliance with the documentation
pertaining to the respective task, in particular its safety information and warning notices. Qualified personnel, based on their
training and experience, are capable of identifying risks and avoiding possible hazards when working with these products.
WARNING
Proper use
SIMATIC products are intended for the automation of mechanical systems, control technology and process engineering. For
information on the intended area of application of the respective product (e.g. ambient conditions such as indoor use), refer
to the associated operating instructions.
If products and components from other manufacturers are used, these must be recommended or approved by Siemens.
Proper transport, storage, setup, assembly/disassembly, installation, commissioning, operation and maintenance are
required to ensure that the products operate safely and without any problems.
Failure to do so may result in death or serious physical injury.
Observe the notes in the associated operating instructions.
Observe the ambient conditions for intended operation as described in section "Technical specifications" of the relevant
operating instructions.
WARNING
Power supply connection
The power supply may only be connected by qualified and authorized personnel. Pay particular attention to the information
on the nameplate of the device.
© Siemens 2024. All rights reserved
A5E53488386-AA, 01/2024
7