Parkside PKZ 1000 A1 Bedienungs- Und Sicherheitshinweise Seite 7

2. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we hope your new tool brings you much enjoyment and success.
NOTE:
According to the applicable product liability laws, the manufacturer of the device does not assume liability
for damages to the product or damages caused by the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service technicians,
• Installation and replacement of non-original spare parts,
• Application other than specified.
m We recommend:
Read through the complete text in the operating instructions before installing and commissioning the device.
The operating instructions are intended to help the user to become familiar with the machine and take ad-
vantage of its application possibilities in accordance with the recommendations.
The operating instructions contain important information on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, costly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating instructions, you have to meet the applicable regulations
that apply for the operation of the machine in your country.
Keep the operating instructions package with the machine at all times and store it in a plastic cover to protect
it from dirt and moisture. Read the instruction manual each time before operating the machine and carefully
follow its information.
The machine can only be operated by persons who were instructed concerning the operation of the machine
and who are informed about the associated dangers. The minimum age requirement must be complied with.
In addition to the safety instructions contained in this operating manual and the specific regulations of your
country, the technical rules generally accepted for the operation of machines of the same type must be
observed.
We accept no liability for damage or accidents which arise due to non-observance of these instructions and
the safety information.
GB/CY 3