Assembly
10/09
–
Apply the air connectors.
–
Screw in the screws M4 x 10.
Tool: No. 2 Philips screwdriver or cordless screwdriver with No. 2 PBZ bit
–
Screw in the screws M4 x 10.
Tool: No. 2 Philips screwdriver or cordless screwdriver with No. 2 PBZ bit
–
Hold the gaiter up.
–
Push the cables downwards through the gaiter.
–
Screw in the screws M4 x 10.
Tool: No. 2 Philips screwdriver or cordless screwdriver with No. 2 PBZ bit
–
Click in the clips.
–
Screw in the screws M4 x 10.
Tool: No. 2 Philips screwdriver or cordless screwdriver with No. 2 PBZ bit
Installation instructions 35/46