Disassembly
10/09
4.3
Removing the front panel
–
Loosen the screws as necessary.
Tool: Socket wrench with 4 mm hexagonal head or Allen key 4 mm
–
Carefully remove the upper edge of the front panel from the holder (pull
upwards).
–
Lift the front panel in order to lift it out of the two lower hooks.
–
Then remove the front panel to the front and lay it aside.
WARNING!
Danger of scratching or breakage!
Store the front panel in a clean and safe location.
4.4
Removing the well
–
Unplug the mains connection for the air conditioning unit.
–
Unscrew the screws.
Tool: No. 2 Philips screwdriver or cordless screwdriver with No. 2 PBZ bit
–
Fold the control unit cover downwards.
–
Unplug the operating controls.
Installation instructions 19/46