urmet 1067 Bedienungsanleitung Seite 2

ENGLISH
WARNING: In this document, just a number of basic indications on the product are present.
For further detailed information, refer to Urmet 1067 and 1068 series control panels manuals.
Power supply in CAT II 2500 V. Once installed, the power supply is subject to transient voltages higher
than those of the overvoltage category for which is was designed. For this reason, an additional transient
voltage protection is required outside the device.
GENERAL DESCRIPTION
1067/092 additional power supply unit is an optional device of 1067/052A and 1068/010 control panel.
1067/092 unit is provided with an electronic board integrating inside itself an 1067/008A type expansion
that is directly connected to control panel BUS, a repeater module to extend control panel BUS length and
an additional power supply unit able to feed devices connected to the system.
The 1067/092 unit is provided with:
 8 inputs;
 1 balanced SAB input;
 3 outputs (1 relay output and two electric outputs);
 1 switching power unit;
 Battery housing;
 Housing for two expansions.
2 DS1067-112A