Godox ML-150 II Macro Ring Flash Benutzerhandbuch Seite 8

Power Switch
Switch the power switch to ON position to power on.
Slide the power switch to OFF position to power off.
Charging Indicator Instruction
Turn the flash on, the charging indicator turns red, and it is ready to shoot.
If the charging indicator lamp blinks red in every 1s, it indicates low battery. In such case,
please replace the batteries.
Output Control
The flash unit has 6 stops of power output control from 1/32 to 1/1 in 1/2 stop of increment.
Press + button to increase power by 1/2 stop, otherwise, press - button to decrease power by
1/2 stop.
Synchronization Function
The flash and camera will trigger synchronously by using a PC sync cord to connect the sync
terminals of the camera and the flash together.
Note: PC sync cord is sold separately.
Power Saving Function
The flash unit is equipped with power saving mode. When idle for about 30 minutes, it will
enter deeper sleep state automatically to save power. To restart the unit, just press any
button.
8