HEYLO DE20 Betriebsanleitung Seite 37

22 Decommissioning,
storage and disposal
The following principles apply for the decommis-
sioning, storage and disposal of the device:
DANGER
Danger to life due to electric shock
Touching electrically live parts can be fatal.
a) Switch off the device and pull out the mains
plug.
22.1 Decommissioning
Temporary decommissioning
Operating mode
a) Move the
the 0 position.
b) Clean the device (see Cleaning and mainte-
nance [ 33]).
 The device has now been temporarily decom-
missioned.
Final decommissioning
 Carry out all the steps needed for temporary
decommissioning.
a) Disconnect all the incoming and outgoing
lines (power supply lines).
 You have now taken the device permanently
out of service.
See also
 Contacting Dantherm GmbH
22.2 Storing the device
Store the device dry and free of frost.
See also
 Technical details [ 35]
 Operating conditions [
EN
rotary selector to
[ 22]
25]
22.3 Disposal
The device is largely made of recyclable materials.
It does not represent any danger to the operator
and the environment when handled properly.
However, operation of the device may lead to the
generation of waste and waste water containing
harmful and/or environmentally hazardous sub-
stances (air filters). These materials must be dis-
posed of properly in accordance with the regula-
tions.
The individual components of the device (e.g.
metal components, etc.) must be taken to a quali-
fied disposal and recycling company. Appoint a
qualified, specialist company to dispose of and re-
cycle the device.
See also
 Contacting Dantherm GmbH
23 Technical details
Type:
Nominal heating output max.
[kW]
Air throughput [m 3 /h]
Sound level at a distance of
3 m [dB(A)]
Power connection [V/Hz]
IP enclosure class
Current consumption max.[A]
Fuse protection [A]
Temperature limit for manually-
resetting thermostat [°C]
Length [mm]
Width [mm]
Height [mm]
Weight [kg]
Electric heater DE20
[ 22]
DE20
18
1050
59
400 / 50
21
26
32
100
570
414
482
18,5
35 / 36