Werbung
WF-CD77H/E
CP-CD77
©
CD SECTION
7
A
- Setting the TEST Mode
"| E _ "|
(Refer to Fig. 16-1)
Lo LJ
O
TEST
MODE
O
dea
le
TEST
MODE
1
ea
TEST
MODE
2
B= =
ais
TEST
MODE
3
1Eo | [©
TEST
MODE
4
|
{td
|e
TEST
MODE
5
Pressing
CALL
button and CLEAR
button simultaneously,
set
the selector switch to CD. As a result the whole
indication
appears for 1.5 sec, and "TEST MODE 0" (1) is indicated.
Then once
press the PLAY
button. As a result "TEST
MODE
1" (2) is indicated, and the laser lights.
If the PLAY button is pressed again, "TEST MODE 2" (3) is
indicated, and Focus starts (Focus Servo On).
When
the PLAY
button is pressed
(third time), "TEST
MODE
3" (4) is indicated, and the spin motor starts (Spin Servo On).
When the PLAY button is pressed (fourth time), "TEST MODE
4" (5) is indicated, and Tracking Servo is turned on.
When
the PLAY
button is pressed
(fifth time),. track No. and
time are indicated (6).
The sixth key input and subsequent key inputs are not accepted.
CL
C1
When
the STOP
button is pressed, pertinent operation stops,
resulting in stop state. In this case the pickup does not slide,
and "TEST MODE 0" is indicated.
While
the FAST
FORWARD
(REWIND)
button
is pressed,
the
pickup
slides to outward
(inward).
While
this operation
is
executed, the test mode indication does not change.
Caution:
The
above-mentioned
TEST
Mode
cannot
be set
unless the CD cover open-close switch is set to ON.
TC}
ju)
iu
C4) jC
Figure 18—1 TEST MODE
Werbung
