AEG SR 4366 CD/MP3 Bedienungsanleitung Seite 38

English
38
Always keep the CD deck closed.
NOTE:
• If a disc is inserted the wrong way, or if no disc is
inserted, the message "– – –" will flash and "NOd" will
appear on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.
Description of the CD buttons
/ (10)
You can briefly interrupt and resume playback using this but-
ton. The symbol " " flashes on the display. Pressing again
continues playback.
/ (9/8)
When an audio CD, or a CD in MP3 format or audio file
format is playing:
With you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The button can be used as follows:
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc. If the button
is kept pressed down, the machine starts to
search through the tracks.
STOP/USB (11)
Press briefly:
The playback is stopped.
Keep pressed:
Select the USB port.
PROG./P-MODE (21)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
• When playing back music to select the replay mode (see
next chapter).
When playing an audio CD:
Press once = (The symbol
is repeated continuously.
Press twice = (The symbol
played continuously.
Press three times = (RDM appears in the display) all titles are
replayed successively in random order.
Press four times = (INTRO appears in the display) every title
of the CD is played for 10 seconds each.
Press five times = All functions are cancelled. The normal
play mode is resumed.
Only for CDs in MP3 format or audio file formats which are
playing:
Press once =
Press twice =
Press three times = (The symbol
Press four times = (RDM appears in the display) All titles are
Press five times = The function is deactivated and the CD is
FOLD+/+10 and FOLD-/-10 (22/20) (only with MP3 CD' s )
• Press this button during playback to skip forward, or back
• Keep the button pressed down to select the next or
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the STOP/USB button (11).
2. Press the PROG./P-MODE button (21). "P01" (preset lo-
3. Select the next track with the / button and press the
4. Press the
5. Press once the STOP/USB button to stop the playback
6. To play the programme back again, press the
flashes) the current track
7. To delete the program, press the STOP/USB button
is lit) the whole CD is
The device stops automatically after all the programmed
titles have been played back. The PROG display will go out
and the programmed sequence will be deleted from the
memory.
(The symbol
is repeated continuously.
The selected folder of the MP3 CD is re-
peated continuously (
in the display).
played continuously.
replayed successively in random order.
played in the normal mode.
by 10 titles each (if more than 10 titles are stored on a
CD).
previous folder (if the CD contains several folders).
cation) appears on the display and PROG flashes on the
display. Use the / buttons (9/8) to select the desired
track and then press the PROG./P-MODE button again.
The display changes to memory slot P02.
PROG./P-MODE button again. Repeat the procedure
until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the
display.
/ button (10). The playback starts. The
first selected track number is shown on the display, the
message "CD " or "MP3 " and PROG is shown on
the display.
while retaining the program.
button.
twice. The PROG control lamp goes out.
flashes) the current track
FOLD appears
is lit) the whole CD is
/