pichler XQ+ 15 Benutzerhandbuch

Thank you for purchasing a Pichler ESC. Please read the safety information contained in this manual carefully
before using this product. Pichler have no control over the use, installation, application, or maintenance of
these products, thus no liability shall be assumed nor ac cepted for any damages, losses or costs resulting
from the use of this item.
Important warnings
• Pichler is not responsible for your use of this product, or any damage or injuries you may cause or
sustain as a result of its usage.
• Always place safety as priority when you use the product.
• An electric motor that is connected in combination with a battery and/or ESC may start unexpectedly
and cause serious
• damage and so should always be used with care and respect.
• We recommend you always remove the propeller when working on a model with the power source
connected.
• Follow and observe all local laws and by-laws relating to model flying when flying RC planes.
• Never fly over others or near crowds.
Key Features
1. Adopting new generation craft on the MOSFET, low heat generation, withstand large current instantly,
and high reliability.
2. Adopting high performance 32 bit microprocessor, stronger computing ability and faster running
speed.
3. Super smooth start-up and accurate throttle linearity.
4. Mini size, light weight, Higher driving efficiency and more energy-saving.
5. Two modes" Foward Only" and" Forward and Reverse" for ultimate 3D/4D flying.
6. Super strong SBEC output, continuous 5V/3A, peak 3.5A current.
7. Multiple protections: start-up, over-heat, low-voltage cutoff, signal loss, phase loss etc.
8. Support high RPM motors, and compatible with most motors in the market.
9. Support programming via transmitter.
Specification
Type PN#Model
XQ+ 15 15919
ESC User Manual XQ+ 15
Cont./Burst Battery Cell
Current (A) NIXX\LiPo
15A/30A S-12NC/2-4S
Weight BEC
(g) Output
9 5V/3A
Size (mm) User
L*W*H Program
25,5*25*5,2 Yes