Miele PWM 916 SD Installationsplan Seite 34

en - PWM 916
Technical data
Voltage versions and electrical data
3N AC 400 V, 50/60 Hz, SD
Supply voltage
Frequency
Required fuse rating (on site)
Power rating
Connection cable, min. cross-section
Cable gland
3N AC 400 V, 50/60 Hz, SI
Supply voltage
Frequency
Required fuse rating (on site)
Power rating
Connection cable, min. cross-section
Cable gland
Plumbing
Models with detergent drawer (DD)
Permitted flow pressure
Maximum intake rate
Cold water connection
(to be provided on site, male thread according to DIN 44991, flat seal)
Optional hard water connection, cold
(on-site external thread according to DIN 44991, flat seal)
Hot water connection (≤ 70 °C)
(on-site external thread according to DIN 44991, flat seal)
Length of inlet hoses supplied
Drainage
Maximum drain water temperature
Waste water connection (on machine)
Drain (on site)
Maximum drainage rate
Connection for equipotential bonding
Male thread
Toothed washers
34
3N AC 400V 50/60Hz
3N AC 400V 50/60Hz
3 x ½" with ¾" threaded union
2 x ½" with ¾" threaded union (optional)
1 x ½" with ¾" threaded union
Plastic pipe HT DN 70
Connection DN 70
50/60 Hz
16 A
2,3 kW
1,5 mm²
50/60 Hz
16 A
2,3 kW
1,5 mm²
1000 kPa
47,5 l/min
1,55 m
95 °C
200 l/min
M10
M10