Clean Air Optima CA-605B Smart Gebrauchsanweisung Seite 14

Troubleshooting
The following is a troubling shooting guide to help you solve any issues that you may have
using the Clean Air Optima
Problem
No mist diffused.
The mist has a strange
odour.
The volume of spray
mist is too low.
Device is noisy.
Spray mist is coming
out of the area around
the mist nozzle.
Operation with Clean
Air Optima® App does
not work.
14
®
Ultrasonic Humidifier CA-605B Smart.
Possible Cause
Power plug not plugged in.
ON / OFF button not activated.
Empty water tank.
Not enough water in tank.
A new device.
It either has dirty water or the
water has been stagnant too
long.
Too much mineral scale in
the water basin and on the
transducer.
Water is too dirty or water was
kept too long in the tank.
Water tank not positioned
correctly.
Not enough water in the water
tank.
Device is on an unstable
surface.
There are gaps between the
housing around the nozzle and
the top of the water tank/ top
panel.
Smartphone or tablet is not
connected to WiFi network.
The device has no connection to
the network.
Solution
Plug in device.
Press ON / OFF button.
Fill tank with water.
Refill tank with water.
Remove the water tank, unscrew
the lid and let it air out in a cool
area for 12 hours.
Clean the water tank and refill
with clean water.
Clean the water basin and the
transducer with:
Clean Air Optima® Cleaner &
Descaler.
Clean the water tank and refill
with clean water.
Correctly position water tank on
the base.
Refill water in the water tank.
Place device on solid and even
ground.
Remove the top panel from the
water tank and clean with a damp
cloth. Reattach to the water tank.
Check whether the top panel is
properly connected to the panel.
Switch off the device and re-
set the WiFi on the device by
pressing the Sleep mode but-
ton for 3 seconds, the indicator
light of the WiFi will blink. Than
follow step 3 to 8 from chapter
Operation with Clean Air Optima®
App.