Kärcher SC 5.850 C Bedienungsanleitung Seite 25

Long heating-up time
Steam boiler is decalcified
 Descale the steam boiler.
No steam
Display - water shortage blinks red and
signal is emitted.
No water in the water reservoir.
 Fill the water reservoir up to the "MAX"
marking.
Display - water shortage lights up red.
No water in the steam boiler. Overheating
protection of the pump was triggered.
 Turn off the appliance.
 Fill the water reservoir up to the "MAX"
marking.
 Turn on the appliance.
Water reservoir has not been inserted prop-
erly or is calcified.
 Remove the water reservoir and rinse it.
 Insert the water reservoir and press
downwards until it arrests.
Steam lever cannot be pressed
anymore
Steam switch is secured with the lock /
child-proof lock.
 Move the child protection unit forward.
Steam iron "spits out" water!
 Set the thermostat to level •••.
 Rinse or decalcify the boiler of the
steam cleaner.
Steam level VapoHydro selected
 Turn the selector switch to the steam
level selection range.
After breaks during ironing, water drops
will come out of the steam pressure iron.
During longer breaks from ironing, the
steam in the steam line can condense.
 Direct the first burst of steam at a sepa-
rate piece of cloth.
High water output
Steam boiler is decalcified
 Descale the steam boiler.
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.
Technical specifications
Electrical connection
Voltage
Protection class
Protective class
Performance data
Heating output
Heating output steam
iron
Operating pressure
max.
Heating time
Steam volume
– Continuous steaming
– Steam push max.
– Vapohydro
Filling quantity
Water reservoir
Boiler capacity
Dimensions
Weight (without acces-
sories)
Length
Width
Height
Subject to technical modifications!
– 14
EN
Spare parts
220-240 V
1~50 Hz
IPX4
1800 W
700 W
0,4 MPa
4 Minutes
50 g/min
130 g/min
230 g/min
1,5 l
0,5 l
6,0 kg
439 mm
301 mm
304 mm
I
25