Herunterladen Diese Seite drucken

Invacare Aquatec Ocean E-VIP Gebrauchsanweisung Seite 17

Dusch- und toilettenrollstuhl
Vorschau ausblenden Andere Handbücher für Aquatec Ocean E-VIP:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
Maintenance
WARNING
▸ Never carry out unauthorized repairs or other work on the
spindles or electric components. If a spindle is damaged or
faulty, contact the dealer immediately.
1. Check the product regularly for damage and to ensure that it is
securely assembled.
2. In the event of damage and/or necessary repairs, contact the dealer
immediately.
3. The product must be checked by an authorized dealer before
every re-use or after 24 months at the latest (see Manufacturer's
recommendation for rehab products of the SPECTARIS industrial
association).
7.2
Cleaning and disinfection
The product can be cleaned and disinfected using commercially availa-
ble agents.
IMPORTANT
Hygiene is particularly important in a sensitive area like the
toilet.
▸ Keep the product clean and wash it regularly.
1. Disinfect the product by wiping down all generally accessible sur-
faces with disinfectant (after disassembling the product, if possible).
IMPORTANT
All cleaning agents and disinfectants used must be effective,
compatible with one another and must protect the materials
they are used to clean.
▸ For further information on decontamination in Healthcare
Environments, please refer to 'The National Institute for
Clinical Excellence' guidelines on Infection Control www.
nice.org.uk/CG139 and your local infection control policy.
▸ Clean the product by hand.
▸ Do not use abrasive cleaning agents.
Shower and Toilet Commode Ocean E-VIP
Cleaning the seat frame and chassis
CAUTION Risk from electric current
▸ Before cleaning, close off all caps and secure all connectors.
IMPORTANT Risk of damage
▸ Do not remove the accessory holders.
1. Close off all caps and secure all connectors.
2. Remove any attached accessories.
3. Pull the footrests out of the guides.
4. Remove the seat plate and backrest cover.
5. Wash down the individual parts using commercially available
cleaning agents (e.g. all-purpose cleaner) and a cloth or brush.
6. Rinse the parts with warm water.
7. Dry the parts with a cloth.
8. Reassemble the shower and toilet commode.
CAUTION Risk of burning
▸ Allow the shower and toilet commode to cool down after
cleaning.
Cleaning in a clinical environment
CAUTION Risk of burning
Allow the product to cool down after autoclaving.
1. In addition to cleaning as described above, the product should
also be cleaned at regular intervals at 85 °C for 3 minutes in the
autoclave.
Cleaning the backrest cover
1. Remove the backrest cover.
17

Werbung

loading