Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PANEL FACILITIES AND FUNCTIONS
REAR PANEL
NOTE:
The PHONO terminals are provided with shorting pin plugs (two).
Before
connecting
equipment
to
these
terminals,
therefore,
. remove
the
shorting
pin plugs
and
insert
them
into
unused
INPUT
terminals.
OUTPUT terminals
Connect to the control amplifier input terminals of power
amplifier,
Ground (GND) terminal
Connect to the ground terminal of your turntable.
Tape deck terminals
{TAPE 1]— Tape deck 1 (first deck)
PLAY:
For playback
(connect
to the tape
deck's PLAY terminals)
REC:
For recording
(connect
to the tape
deck's REC terminals)
[TAPE 2]— Tape deck 2 (second deck)
Playback component terminals
[PHONO]— 'Stereo turntable
[CD]—Compact disc player
[TUNER]
— Tuner
[AUX 1]
[AUX 2]
[AUX 3]
Auxiliary terminals
ADAPTOR
terminals
Use to connect a surround processor, graphic equalizer, or
PCM adaptor.
Power cord
Connect to a household wall outlet, or the power outlet of
an audio timer.
AC OUTLETS (SWITCHED)
Power supplied through these outlets is turned on and off by
this equipment's POWER switch. Total electrical power con-
sumption
of connected
equipment
should
not
exceed
250 W.
AC OUTLETS (UNSWITCHED)
Power flows continually to this outlet, regardless of whether
this equipment is switched ON or OFF. Electrical power con-
sumption
of connected
equipment
should
not
exceed
250 W.
The equipment should be disconnected
by removing the
mains plug from the wall socket when not in regular use, e.g.
when on vacation.
NOTE:
Do not connect appliances with high power consumption such as
heaters, irons, or television sets to the AC OUTLETS in order to
avoid overheating or fire risk.
This can cause this equipment to malfunction.
The U.K. model is fitted with the AC
outlet shown in the figure.
6
<ARE1026>
Werbung
