Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. (C) type hinge is available in soft open-
ing/closing door types.
7. Get the oven door to a half-open posi-
tion.
8. Pull the removed door upwards to re-
lease it from the right and left hinges
and remove it.
To reattach the door, the proced-
ures applied when removing it must
be repeated from the end to the be-
ginning, respectively. When in-
stalling the door, be sure to close
the clips on the hinge socket.
7.8 Removing the Inner Glass of The
Oven Door
Inner glass of the product's front door may
be removed for cleaning.
1. Open the oven door.
2. Pull the plastic component, attached on
the upper section of the front door, to-
wards yourself by simultaneously push-
ing on the pressure points on both sides
of the component and remove it.
3. As shown in the figure, gently lift the in-
nermost glass (1) towards "A" and then,
remove it by pulling towards "B".
1
Innermost glass
4. If your product has an inner glass (2), re-
peat the same process to detach it (2).
5. The first step of regrouping the door is
to reassemble the inner glass (2). Place
the bevelled edge of the glass to meet
the bevelled edge of the plastic slot. (If
your product has an inner glass). Inner
glass (2) must be attached to the plastic
slot closest to the innermost glass (1).
6. While reassembling the innermost glass
(1), pay attention to place the printed
side of the glass on the inner glass. It is
EN / 37
2* Inner glass (it may
not be available for
your product)
EN
DE
Werbung
