Werbung
Verfügbare Sprachen
Verfügbare Sprachen
On models with wire shelves :
On models without wire shelves :
Tray stopping function - On models with
wire shelves
There is also a stopping function to prevent
the tray from tipping out of the wire shelf.
While removing the tray, release it from the
rear stopping socket and pull it towards
yourself until it reaches the front side. You
must pass over this stopping socket to re-
move it completely.
Proper placement of the wire grill and tray
on the telescopic rails-On models with
wire shelves and telescopic models
Thanks to telescopic rails, trays or the wire
grill can be easily installed and removed.
When using trays and wire grills with the
telescopic rail, care should be taken that
the pins on the front and back of the tele-
scopic rails, rest against the edges of the
grill and the tray (shown in the figure).
Frying grill (Airfry) usage
Frying grill is composed of two pieces as
wire basket and wire frame where the bas-
ket will be placed. Wire basket is placed on
the wire frame in an interlaced fashion.
After placing the rear part, place the wire
basket inside the handles of the wire frame
by stretching the front a little. And remove
the wire basket by stretching the front
handle of the wire frame.
EN / 16
EN
DE
Werbung
