Herunterladen Diese Seite drucken

Pinolino Skadi 13 16 02 B Aufbauanleitung Seite 4

Werbung

IMPORTANT! STORE FOR LATER
REFERENCE.
READ CAREFULLY
Only use as changing unit if completely assembled!
Dear clients,
We are glad that you have chosen this premium product made of solid wood. We, the Pinolino staff, have manufactured this item
with greatest care. In doing so, we have exclusively used European timbers from certified forest stands. The lacquers, oils, glues and
fabrics that were used are eco-friendly and comply with the strict European safety standards.
To spare you unnecessary effort, carefully read the assembly instructions first. Check whether you have all the parts and study the
illustrations carefully before you start the assembly. Improper handling or assembly and especially construction alterations will
void all warranty claims.
WARNING!
Do not leave your child unattended.
Safety requirements:
Please check regularly that the screws are well tightened. The screws should not be loose, as children could squeeze certain parts of
their body or catch items of clothing (e.g. laces, necklaces, bands, dolls etc.). These might present the hazard of strangulation.
Please set up the changing unit so that the changing board is leaning directly against the wall. Tilting can be prevented by tightly
anchoring the changing board in the wall. Use only appropriate screws and wall plugs for changing units that are meant to be fixed
to the wall. Check the wall to determine whether the wall plug is suitable for it.
Take into consideration the risks of open fires and other strong heat sources like electric heaters, gas stoves etc. in the close
proximity of the changing unit.
Do not use the changing unit if single parts are broken, torn or missing. Synthetic bags or other synthetic elements/wrappings
should be immediately removed or kept out of the reach of children.
Keep the assembly plan and the hex key for future disassembly or assembly.
Please use only the enclosed hex key and a screwdriver for the assembly. To avoid damaging the product, do not use an electric
screwdriver for tightening the screws! Do not use the changing unit if single parts are broken, torn or missing. Should your
changing unit be featured with castors, they have to be locked before using.
Please note:
Use only original accessories and spare parts from the producer or from the providers.
The changing mat must be fastened with proper double sided adhesive tape or with self-adhesive Velcro.
Assembly instructions:
Please take into consideration that the parts should be assembled on an even, flat surface. Make sure that the article is not inclined.
In order to protect the article and the floor, we recommend using the packaging of the article as underlay during the assembly.
Maintenance:
Wipe with a soft, clean and very slightly wet material. Also find details on www.pinolino.de.
What else you should know:
The changing unit is made of solide wood. Wood is a natural product; irregularities in structure and colour are typical features of
this natural product and will thus not constitute a flaw.
In producing our furniture and toys we only use oils, varnishes and glazes that do not pose a health hazard and are appropriate for
children's furniture. As a result of the production process, new furniture can sometimes retain a specific odor. To counter this
harmless inconvenience we recommend repeated venting.
For service cases:
If, despite constant supervision of the production process, a flaw should turn up, please mark the respective part clearly in this
assembly plan. Print the Customer Service contact form from our website, www.pinolino.de. Shortly describe the flaw or the
problem. Send the complete assembly plan, a copy of the receipt and the Customer Service contact form, which you have filled in,
with the specification of the serial number (it can be found on the packaging, on the assembly instructions and on the article), to our
address below.
4

Werbung

loading