Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When choosing the installation material, optimum dimensions have to be chosen in order to secure
maximum safety.
Never install any objects offering a large surface for winds (e.g. banners, signs, etc.).
The loads have to be installed in a balanced way.
Operate the device only after having become familiar with its functions. Do not permit operation by persons
not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
The device must only be installed in the marked operating position (arrow upwards).
The maximum service life must never be exceeded.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
4. DESCRIPTION
4.1 Features
Dimmer Bar for up to six 500 W spots
Makes the installation of your lighting system really easy • Installed directly at the stand or crossbeam • With
6 spot connections • Outputs via 6 safety sockets • Can be used either as a 6 channel chaser controller or a
DMX dimmer pack • 6 different operation modes • 16 pre-programmed chaser-patterns • Chaser-direction
can be inverted • Chaser-speed controllable or sound-controlled • Sound-control via built-in microphone •
Remote-control via optional footswitch
4.2 Description of the device
4.2.1 Frontpanel
(1) Fixation point
(2) Power outlet
(3) Fuseholders
(4) MIDI IN-socket
(5) MIDI THRU-socket
(6) DMX IN-socket
All manuals and user guides at all-guides.com
18/25
(7) DMX OUT-socket
(8) Power connection
(9) TV pin
(10) Footswitch-socket
(11) Lighting controller
00020436.DOC, Version 1.3
Werbung
