GreenWorks GD48LM41II Bedienungsanleitung Seite 7

EN
1 DESCRIPTION
1.1 PURPOSE
The lawn mower is intended for private use i.e. for use
in home and gardening environments. The machine is
primarily used to maintain small-scale, residential lawns
and home/hobby gardens.
1.2 OVERVIEW
Figure 1-11
Start handle
1
Start button
2
Upper handle
3
Lower handle
4
Rear discharge door
5
Height adjustment button
6
Battery door
7
Quick-release lever
8
Grass catcher
9
Mulch plug
10
LED headlight
11
Cam locks
12
Knob
13
Hook
14
Battery
15
Blade
16
2 SAFETY
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
Do not use accessories that are not recommended by
the manufacturer.
Do not put in the safety key or the battery pack until
you finalised the assembly of all the parts.
3.1 UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
WARNING
WARNING
WARNING
WARNING
English
• If parts of the machine are damaged, do not use
the machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
For your personal safety, do not insert battery before
the tool is assembled completely.
3.2 UNFOLD AND ADJUST THE
LOWER HANDLE
Figure 2
1. Pull up and back the lower handle to operation
position. Make sure that the handles click into
position correctly.
2. Tighten the lower handle with the quick-release
levers on the two sides.
Make sure that the two handles are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
3.3 INSTALL THE UPPER HANDLE
Figure 3
1. Align the holes in the upper handle and the lower
handle.
2. Put the cam locks through the holes.
3. Tighten the knobs onto the cam locks.
4. Do the same operation on the other side.
3.4 INSTALL THE GRASS CATCHER
Figure 4
1. Remove the mulch plug.
2. Open the rear discharge door and hold it.
3. Hold the the grass catcher by its handle and put the
hooks over the slots.
4. Close the rear discharge door.
4
WARNING
WARNING
NOTE
WARNING