Camp Safety TRIPOD EVO Gebrauchsanweisung Seite 3

REVISION
The product must be withdrawn from use immediately when it have been used to arrest a fall.
Manufacturer's inspection of the tripod must be carried out after a fall or whenever a defect has been detected during periodic inspection.
The manufacturer's inspection can be carried out by:
- manufacturer
- or person recommended by manufacturer
- or company recommended by manufacturer.
During this inspection will be established if the product can be longer used and will be defined the admissible time of the product use till next
manufacturer's inspection.
LIFETIME
The lifetime is unlimited, unless any defect appears and provided that periodical check-ups are made at least once every 12 months and
the results are recorded in the life sheet of the product. The following factors can reduce the lifetime of the product: intense use, damage
to components of the product, contact with chemical substances, high temperatures, tears and abrasions, violent impacts, failure to maintain
as recommended. When suspect that the product is no more safety and reliable, please contact C.A.M.P. spa or the distributor.
CONTENT OF THE IDENTITY LABEL
a. Device type
b. Reference number
c. Number/year/ class of the European standard
d. CE marking and number of a notified body
controlling manufacturing of the equipment (art. 11)
e. Month and year of manufacture
d
f. Serial number of the tripod.
g. Caution: red the manual
c
h. Marking of the manufacturer or distributor of the
tripod.
i. Certified model according to EAC standard
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED. THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST
USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS,
REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON. THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE
PERIOD OF EQUIPMENT UTILIZATION. DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD. ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
IDENTITY CARD
MODEL AND TYPE OF EQUIPMENT
SERIAL NUMBER
USER NAME
DATE OF PURCHASE
PERIODIC EXAMINATION AND REPAIR HISTORY
REASON FOR
DATE
ENTRY PERIODIC EXAMINATION
OR REPAIR AND OTHER REVELANT INFORMATIONS
1
2
3
4
is a brand owned by
a
e
Numero di lotto
Batch number
TRIPOD
04 16
EVO
Numero di serie
Serial number
Ref. 1883
1234
b f
i
REF. NUMBER
DATE OF MANUF.
DATE OF PUTTING
INTO OPERATION
DEFECTS NOTED, NAME AND SIGNATURE
REPAIRS CARRIED OUT OF COMPETENT PERSON
Instruction Manual
READ CAREFULLY BEFORE USE
Notified body, at which the European certification was performed and which supervises the production of the equipment: APAVE SUDEUROPE SAS - BP 193 - 13322 MARSEILLE CEDEX 16 - FRANCE
TRIPOD EVO is a component of personal protective equipment against falls from a height.
TRIPOD EVO has been tested in according to EN 795 as a transportable temporary anchorage class B.
Tripod has to be used in conjunction with fall arrest equipment . It is designed to support only one person.
TRIPOD EVO is designed to use with 284 rescue lifting device.
TECHNICAL DATA
! working load limit: 500 kg
! working height:
- legs fully extended: 229,5 cm
- legs fully retracted: 147,2 cm
! weight: 17 kg
g
! shipping dimensions: 172,3 x 23 x 23 cm
BASIC EQUIPMENT
h
! head - made of zinc-plated painted steel
! anchor points - 1main central eye bolt and 3 additional lateral eyes in the head.
legs - aluminium adjustable locking legs are secured by safety pins . Steel feet incorporate a rubber sole for flat surfaces
!
and spiked edges for slippery surfaces.
chain - leg chain is supplied to minimize horizontal forces and prevent the legs spreading and collapsing.
!
head
3 additional lateral eyes
central eye bolt
outside part of leg
detent pin
PERIODIC
EXAMINATION
NEXT DUE DATE
inside part of leg
chain
steel foot
Safety
Tripod
THE EQUIPMENT
TRIPOD EVO
EN 795:1996 /B + A1:2000
TP TC
019/2011
Ref.: 1883
locking hole for
the ref.284
fastening
3 additional
anchor eyes
central eye bolt