Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Nous espérons que vous apprécierez votre nouveau poêle. En tant que nouveau propriétaire d'un poêle AMI,
vous avez acquis un produit avec un design intemporel et une longue durée de vie. Nous avons également un
processus de combustion à la fois écologique et efficace pour la production de chaleur AMI Fire et HiFlame
se concentrent uniquement sur les poêles à bois depuis 2004 et imposent des exigences élevées à leurs
produits. Pour vous assurer que votre poêle est bien utilisé, veuillez
Lisez attentivement ces instructions.
Table des matières
Regulatory information
1.
Technical data
2.
Dimensions
3.
Stove installation
4.
Floor loading
4.1
Floor conditions
4.2
Safety clearances to combustible materials
4.3
Installation instructions
4.4
Combustion air supply
4.5
Chimney and flue pipe
5.
Removing the loose components
6.
The appliance must not be modified
7.
Fuel
8.
Stove operation
9.
Maintenance.
10.
Troubleshooting
11.
NOTE:
Report the installation of a stove to
your local authority.
The owner of the house is personally responsible for
ensuring
compliance
requirements and must have the installation approved by a
qualified inspector. Your local chimney sweep must also
be informed of the installation, as this will affect the
routines for regular chimney-sweeping service
It is recommended to consult a registered installer prior to
installation.
The registered installer will inform you about the locally
applicable regulations and issue the necessary permit for
operation of the stove following correct installation.
Bienvenue à AMI
with
the
mandatory
Fires
WARNING!
The stove becomes very hot!
CASING, FRONT AND GLASS PANEL BECOME
safety
EXTREMELY HOT DURING OPERATION AND WILL
RESULT IN SERIOUS INJURY AND BURNS IF TOUCHED. IT
IS THEREFORE RECOMMENDED THAT A FIREGUARD IS
USED IN THE PRESENCE OF YOUNG CHILDREN, THE
ELDERLY OR INFIRM.
FR5
THE OUTER
Werbung
