Werbung
Verfügbare Sprachen
Verfügbare Sprachen
We hope you will get a nice pleasure from your new stove. As a new owner of a AMI
Fires stove, you have secured a product with timeless design and long service life.
We also have a combustion process that is both environmentally friendly and
efficient for the heat production AMI Fires and HiFlame has only focus on wood
stoves since 2004 and places the high demands on its products. To ensure that your
stove use for good service, please
read these instructions fully and carefully.
List of Contents
1.Regulatory information
2.Technical data
3.Dimensions
4.Stove installation
4.1Floor loading
4.2Floor conditions
4.3Safety clearances to combustible materials
4.4Installation instructions
4.5Combustion air supply
5.Chimney and flue pipe
6.Removing the loose components
7.The appliance must not be modified
8.Fuel
9.Stove operation
10.Maintenance
11.Troubleshooting
NOTE:
Report the installation of a stove to
your local authority.
The owner of the house is personally responsible for
ensuring
compliance
with
requirements and must have the installation approved by
a qualified inspector. Your local chimney sweep must also
be informed of the installation, as this will affect the
routines for regular chimney-sweeping service
It is recommended to consult a registered installer prior to
installation.
The registered installer will inform you about the locally
applicable regulations and issue the necessary permit for
operation of the stove following correct installation.
Welcome to AMI Fires
the
mandatory
safety
GB21
WARNING!
The stove becomes very hot!
THE OUTER CASING, FRONT AND GLASS PANEL BECOME
EXTREMELY HOT DURING OPERATION AND WILL RESULT IN
SERIOUS INJURY AND BURNS IF TOUCHED. IT IS THEREFORE
RECOMMENDED THAT A FIREGUARD IS USED IN THE
PRESENCE OF YOUNG CHILDREN, THE ELDERLY OR INFIRM
.
Werbung
