Vortice CA Serie Montageanleitung Seite 11

ENgLISH
Typical application
Fig. 1÷5;
Fig.5: A= inlet; B= outlet
Installation
Fig. 7÷15;
N.B.
In the event that the extractor fan is installed at a
height of 2.3 metres or less above floor level, the fixed
protective grille must be fitted (fig.8).
Electrical Connections
Fig. 13.
Maintenance / Cleaning
Fig. 16÷19.
WARNINg
This appliance must be connected during
installation to the accompanying control box, from
which all the relative functions and settings are
selected.
Important information
concerning the
environmentally compatible
disposal
IN CERTAIN EuROPEAN uNION COuNTRIES THIS
PRODuCT DOES
REQuIREMENTS OF THE NATIONAL LAWS
IMPLEMENTINg DIRECTIVE WEEE, AND IN
THESE COuNTRIES THE PRODuCT IS NOT
SuBjECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORkINg LIFE.
This product conforms to EU Directive EU
2012/19/EC.
This appliance bears the symbol
of the barred waste bin. This
indicates that, at the end of its
useful life, it must not be disposed
of as domestic waste, but must be
taken to a collection centre for
waste electrical and electronic
equipment, or returned to a
retailer on purchase of a replacement.
It is the user's responsibility to dispose of this
appliance through the appropriate channels at the end
of its useful life. Failure to do so may incur the
penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent
recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary
damage to the environment and possible related
health risks, and also promotes recycling of the
materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service, or
the shop from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities
for recycling, processing and environmentally
compatible disposal either directly or by participating
in collective systems.
NOT FALL WITHIN THE
11