Listo RCDL180-60hiv2 Bedienungsanleitung Seite 8

12. Transfer the lower door to the property position, adjust the lower hinge part,
make the hinge axis into the lower hole of the lower door, then tight the bolts
13. Upturn the middle hinge part the direction 180 degree, transfer it and adjust its
position, make the middle hinge axis into the upper hole of the lower door, tight the
bolts
14. Transfer the upper door to the appropriate position. Secure the door's level,
make the middle hinge axis into the lower hole of the upper door
15. Transfer the upper hinge part and make the upper hinge axis into the upper
hole of the upper door, and adjust the position of the upper door (please support
the upper door with your hand when doing it), fixing the upper hinge part with the
special flange self-tapping screws.
V.1.0
�;;;:,,-.'-"-middel
hinge part
selftapping
screws
14
f
upper hinge part
'r�
16. lnstall the screw hole cover on the top right corner of the refrigerator. lnstall the
upper hinge cover (which is in the plastic bag) on the left corner. Put the other upper
hinge cover into the plastic bag.
upper hinge
cover (left)
17. Open the upper door and install the door shelves, then close it.
Warning!
When changing the side at which the door opens, the appliance must not be
connected to the mains. Remove plug from the mains beforehand.
screw hole
15
V.1.0