Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN | OTHER FUNCTIONS
FOOT SENSOR FUNCTIONS:
1.
Foot sensor - open ring and cover: Long press the stop + swing button to turn on or off
the automatic opening of the ring and cover by the foot sensor.
2.
Foot sensor - open cover: Long press the stop + massage cleaning button to turn on or
off the automatic opening of the cover by the foot sensor.
3.
Foot sensor - open ring and cover: Long press the stop + cover open button to turn on
or off the automatic function of closing the cover and the seat.
•
Nozzle UV-sterilization: After the user is away from the seat for 1 minute, the nozzle will
automatically perform a deep ultraviolet sterilization for 2 minutes. The sterilization
program automatically stops when a user sits down during the sterilization program.
•
Standby mode: Short press the standby/descale button on the ceramic to turn on or off
the standby function;
•
Short press the standby/descaling button, when you are not seated and the descaling
program is not activated, to turn off all functions and lights and enter standby mode.
•
Automatic opening or closing of the ring and cover: When a person approaches the
ceramic sensing area, the cover automatically opens. When the cover is opened and the
seat ring is closed, tap the ceramic induction area to open the seat. When the cover is
open, touch the ceramic sensing area to close the cover. After 90 seconds of non-
functional operation and having left the seat, the cover and ring are automatically closed
in sequence.
DESCALING FUNCTION:
•
Pipeline descaling: Remove the cover plate from the ceramic. Add descaling liquid into
the descaling container. Close the container and press the standby/descaling button to
turn on or off the descaling program. During descaling, the descaling button indicates a
green breathing light. Please use a descaling agent whose main ingredients are food-
grade citric acid or organic acid. It is recommended to descale every 2-3 months.
•
Dosage: Mix an appropriate amount (solid: 30-40g or liquid: 30-40ml) descaling agent
with 50ml of water and stir until they are fully mixed or dissolved, pour the descaling
solution in the liquid container. Close it and push the descaling program button. It is
recommended to descale every 2-3 months.
22
Werbung
Inhaltsverzeichnis
Fehlerbehebung
