BEMIS PURE CLEAN 5000 Gebrauchsanweisung Seite 21

• User 1/User 2 customization:
1. Under the current use of "water temperature, water volume, spray arm position, air
temperature", press and hold the "User 1 or User 2" button for more than 2 seconds, the
current use setting can be set to the favorite custom button, and all the indicators on the
remote control pane flashes twice, the settings you like have been saved. Press "User 1
or User 2" directly next time, and all gear indicators on the remote control panel will be
on for one second. Press the rear wash or bidet wash button based on your need.
2. Press and hold the "Bidet wash + Drying" button at the same time for 5 seconds to enter-
the code matching mode. The lights on the rear wash, bidet wash, drying and watertem-
perature buttons flash. In the code-matching mode,press the "Water temp." button to
select the corresponding user code, lights of which will light up in sequence from left to
right. After selecting the user code, press the "Stop" key to complete the code matching
operation.
SIDE BUTTON FUNCTIONS
Rotate backward
Press the knob
Rotate forward
While seated:
1. Rotate the side button forward to activate the feminine wash function, and rotate the side
button backward to activate the rear wash function.
2. Short press the button to stop the feminine wash, rear wash or drying function.
3. Press and hold the side button to start the drying function;
4. During feminine wash or rear wash, turn the button forward or backward, to adjust
the nozzle position forwards or backwards.
5. During drying, rotate the button forward to increase the air temperature and
backward to decrease the air temperature.
REMOTE CONTROL & SIDE BUTTON FUNCTIONS | EN
21