Remote Control - BEMIS PURE CLEAN 5000 Gebrauchsanweisung

REMOTE CONTROL

Descaling
Stop
& Ambient light
• Stop: Press the stop button to turn all functions off. When not seated, press and hold the
stop button for 5 seconds to turn on or off the ceramic ambient light.
• Rear wash: Press the rear wash button to start rear cleaning. Auto off after 2 mins use or
stop by pressing stop or another function. Function will stop when user leaves.
• Feminine wash: Press the feminine wash button to start the feminine cleaning. Auto off
after 2 mins use or stop by pressing stop or another function. Function will stop when
user leaves.
• Drying (warm air drying): Press the drying button to start drying. Auto off after 2 mins or
by pressing the stop button. Function will stop if user leaves.
• Deodorization: Press the deodorization button when seated to start the deodorization
function. Function will stop by pressing the stop button or when user leaves.
• Massage cleaning: The massage cleaning mode can only be turned on after the rear
/ bidet cleaning mode has been turned on first. During rear /feminine wash press the
massage cleaning button to start intermittent massage, press the button again to start
continuous massage, press the button for the third time or the stop button to turn the
function off.
• Swing: The swing function can only be turned on after the rear /bidet cleaning mode
has been turned on first. After pressing the bidet /rear cleaning mode - press the swing-
Deodorization Spraying arm Forward
Night light
Spraying arm backward
Rear wash Feminine wash
Seat temperature minus key
REMOTE CONTROL FUNCTIONS | EN
User 1
Swing
Massage cleaning
Drying
Sterilization
User 2
Cover open
Cover+Ring open
Water temperature
Eco mode Auto-cleaning
Seat temperature plus key
19