BEARWARE 20200528HK016 Bedienungsanleitung Seite 30

DCF symbol:
The weather station synchronises the time every night. The symbol begins flash-
ing during synchronisation. If the time has been successfully received, then the
symbol glows continuously until the next synchronisation.
Indoor temperature display:
The indoor temperature is measured by the base station and is shown to an ac-
curacy of one tenth of a degree. The configured temperature unit is displayed to
the right of the measured value. The temperature unit can be changed between
°C and °F. Slide the °C / °F switch on the back of the weather station to the desi-
red position. The display shows "HI" when the measured temperature exceeds
the maximum value. The display shows "Lo" if the value falls below the minimum.
Press the "°C / °F" button to shift between Celsius and Fahrenheit.
Low battery status
If the battery symbol appears, then the inserted batteries are discharged and
should be replaced with new batteries as soon as possible. This applies to the
outdoor sensor as well as to the base station. If the empty battery icon appears
next to the inside temperature, the battery of the weather station is empty.
Outdoor temperature display:
The outdoor temperature is measured by the outdoor sensor and shown to an
accuracy of one tenth of a degree. The configured temperature unit is shown to
the right of the measured value. The temperature unit can be changed between
°C and °F. To do this, slide the °C / °F switch on the back of the weather station
to the desired position. The display shows "HI" when the measured temperature
exceeds the maximum value. The display shows "Lo" if the value falls below the
minimum.
Press the "°C / °F" button to shift between Celsius and Fahrenheit.
30
English