Herunterladen Diese Seite drucken

Harman AKG AMM 10 Bedienungsanleitung Seite 50

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operation
C - MIC IN
CD / PC IN
NOTE
50
All manuals and user guides at all-guides.com
The preamplifier of the MIC/ZOOM module is equipped with a limiter and a configurable
compressor. The limiter ensures a uniform maximum volume, while the compressor largely
compensates for different mouth-to-mic distances or varying loudness of speech. The
compressor function can be configured with jumpers prior to installation.
The front panel contains the volume control and the XLR input socket.
The "High / Low" slide switch is used to select an input sensitivity of -60dBu (High) or -40dBu
(Low). Another slide switch is used to allocate the signal to the left (L) or right (R) stereo
channel, or both channels simultaneously in mono operation (M).
Both slide switches are set back from the surface of the panel to protect against accidental
switching. They can only be operated with a pointed object, such as a ballpoint pen.
Maximum number within the AMM 10 system:
Up to 10 MIC/ZOOM modules can be used, provided the power supply is adequate.
The AUX/LINE-IN module has two stereo phono sockets (L, R) and a 3.5mm stereo jack input.
It also features a volume control.
Maximum number within the AMM 10 system:
Up to 10 AUX/LINE modules can be used, provided the power supply is adequate.
EARTH LOOP
Connecting mains-powered audio sources with unbalanced outputs is often problematic, as an
earth loop may be formed via the equipment's earth wire, antenna or similar.
If you want to use audio sources connected to earth, such as a PC, notebook, video recorder,
tuner or similar with AUX/LINE-IN, we strongly recommend that you use the TRAFO IN (special
accessory)
accessory) (see "TRAFO IN
accessory)
accessory)
TRAFO IN
TRAFO IN" Page 54) plug-in module. This input transformer effectively breaks
TRAFO IN
the earth loop.
(special
(special
(special
AMM 10

Werbung

loading