Harman AKG AMM 10 Bedienungsanleitung Seite 49

All manuals and user guides at all-guides.com
Operation
4 Operation
MASTER CONTROL
The MASTER CONTROL module is connected to the PSU 10 power supply. It supplies power
to the REC OUT recording output module.
The front panel of the MASTER CONTROL has volume, bass and treble controls. How you set
these affects all output modules and the CONTROL OUT module, but not the REC OUT record
module.
Maximum number within the AMM 10 system:
Only one MASTER CONTROL can be used. The system must include this module.
D - MIC IN
The front panel contains the volume control and the XLR input socket.
The "Mic / Line" slide switch is used to select an input sensitivity of -60dBu (Mic) or +/-0dBu
(Line). Another slide switch is used to allocate the signal to the left (L) or right (R) stereo
channel, or both channels simultaneously in mono operation (M).
Both slide switches are set back from the surface of the panel to protect against accidental
switching. They can only be operated with a pointed object, such as a ballpoint pen.
Maximum number within the AMM 10 system:
Up to 10 MIC/LINE modules can be used, provided the power supply is adequate.
AMM 10 49