Werbung
Verfügbare Sprachen
Verfügbare Sprachen
dual outputs and the PWR-ON VOLUME.
17
[23]
REC=IN
The recording source is the same as the listening source. The display
[15] changes the indicating mode to: signal source, volume, and bal-
ance setting.
13
[24]
LC display
Multifunction display field with indicators for: BASS, TREBLE, MAX
VOLUME, SENSITIVITY, etc.
11
[25]
BASS -
@)))
Reduces the content of low frequencies. The current setting is dis-
played when you press this key the first time.
12
[26]
SENSITIVITY
Activates the mode for programming relative volume levels between all
audio inputs and between speakers pairs. Compensation in favor of an
output and the SENSITIVITY of the signal sources.
18
[27]
BASS + .
@)))
Increases the content of low frequencies. The current setting is dis-
played when you press this key the first time.
12
[28]
LOUDN
Switches the tone compensated volume control (LOUDNESS function)
on and off.
12
{29]
TONE
®)))
Switches the tone control (BASS, TREBLE) on and off.
12
[30]
BALANCE
®)))
Shifts the output level in favor of the left channel.
12
[31]
TREBLE -
®)))
Decreases the content of high frequencies. The current setting is dis-
played when you press this key the first time.
12
[32]
BALANCE R
®)))
Shifts the output level in favor of the right channel.
12
[33]
TREBLE +
@)))
Increases the content of high frequencies. The current setting is dis-
played when you press this key the first time.
12
[84]
PRE-OUT
@)))
Switches the preamplifier output PRE-AMP on and off.
11
[35]
SPEAKERS A
®)))
Switches SPEAKERS A on and off.
11
[36]
STORE
Stores the programmed MAX VOLUME or SENSITIVITY setting (except
SENSITIVITY INPUT). A programming sequence can be cancelled at
any time without storing by simply closing the cover.
16
[37]
SPEAKERS B
Switches SPEAKERS B on and off.
11
30
Werbung
