Wohler BC 600 Bedienungsanleitung Seite 18

Mounting the frame in the door or window cut-out
4 Mounting the frame in the door or window cut-out
4.1 Assembling the
frame
Fig. 14: Profile connector
Fig. 15: Profile connector plugged onto
rail end
Fig. 16: Frame parts put together; only
upper view in the picture
The 4 rails are plugged together at each cor-
•
ner with the profile connector.
Put 2 profile connectors on each of two rails of
•
the same length.
NOTE!
The locking lugs (marked with an arrow) must en-
gage.
On delivery, the profile connectors are already on
the horizontal rails. They can remain there even
after dismantling.
Now put all 4 frame parts together.
•
NOTE!
Make sure that the 4 red tension levers are all vis-
ible from one side. The tensioning levers must not
be tensioned at first, so that they can be moved.